Feel free to used and do it with your own risk..
Article were taken from : http://144400hamburapa.siam2web.com//?cid=627457
Some Thailand website
Has been translate to English by Google Translator.. Thanks Google..
How to reset the machine off the page.
Reset CPU to perform the radio communication will set the radio back to the original terms of the production plant. This we will do when the malfunction of the machine. Sometimes you want to delete or save memory. That some models can not be removed but Can be overwritten, so the Reset CPU frequency bands will allow us to save all the missing And back to the original terms of the production plant.
ICOM.
HANDHELDS:.
IC-2GXA - open, press [liGHT> & [FUNCTION> and then turn off again.
IC-2GXAT - Press [FUNC> & [VMC> & [DUP> & [HI / LO> then turn it on.
IC-02AT - Serial numbers below 34000: push the button on the main circuit board next to the lithium battery.Serial numbers above 34000: hold [FUNC> button and turn the radio on.
IC-P2AT - Press the [FUNCTION> & [A>, and then turn it on.
IC-T22A - Full reset: press the [A> & [*> & [FUNC> then turn it on.
IC-V8 - Press [SQL> & [D. CLR> then turn it on.
IC-V21AT - Press the [F> & [A> & [*> then turn it on.
IC-W2A - Press the [FUNCTION> & [A> & [CLR> then turn it on.
IC-W21A - Press the [HI / LO> then turn it on.
IC-W21AT - Press the [F> & [A> & [*> then turn it on.
IC-W31A - Full reset: press the [A> & [*> & [MONI>. And then turn Partial reset: hold [A>, and then turn it on.
IC-W32A - Full reset: Press [SQL> & [VFO> & [MR> then turn it on. Partial reset: hold [VFO> then turn it on.
IC-Z1A - Full reset: press the [A> & [*> & [MONI> then turn it on. Partial reset: hold [A>, and then turn it on.
MOBILES:.
IC-228A / H - Press the [SQUELCH / MONITOR> & [LOCK> then turn it on.
IC-229A / H - press [SET> & [MW> then turn it on.
IC-281H - Full reset: press [SET> & [SPCH> then turn it on. Partial.
IC *** 2000H *** Press [SET> & [PGR / CS / MW> then turn it on.
IC *** 2100H *** Full reset: press [SET> & [S. MW> then turn it on. Partial reset: hold [V / MHz> and then turn it on.
IC *** 2340H *** Full reset: press [SET> & [SPCH> and turn the Partial reset: hold [SPCH> then turn it on.
IC *** 2350H *** Full reset: press [SET> & [S. MW> then turn it on. Partial reset: hold [DUP> & [LOW>. And then turn it on.
IC *** V8000 *** Press [SET> & [MW> then turn it on.
reset: hold [SPCH> then turn it on.
IC-448A - Press the [SQUELCH / MONITOR> & [LOCK> then turn it on.
IC-449A - press [SET> & [MW> then turn it on.
IC-481H - Full reset: press [SET> & [SPCH> and turn the Partial reset: hold [SPCH> then turn it on.
VHF / UHFBASE:.
IC-271A / H - Reprogram the RAM card.
IC-275A / H - Press the [M-CL> and then turn it on.
KENWOOD.
HANDHELDS:.
TH-22 - Press the [F> open and then turn it on.
TH-25 - Press [M>, then press the power button, [M> again.
TH-42 - Press the [F> open and then turn it on.
MOBILES:.
TM-732 - Press [MR> open and then turn and press [MR> again.
TM-241/441/541 - Press [MR> open and then turn and press [MR> again.
TM-261/461 - Press [MR> open and then turn and press [MR> again.
TM-V7 - Press [MR> open and then turn and press [MR> again.
TM-231/331/431/531 - Press [MR> open and then turn and press [MR> again.
YAESU / Vertex.
HANDHELDS:.
FT-411 - Turn off radio, press [MR> with the [2>, and buttons [VFO> hold, turn, and then set the frequency to the lowest in the region for example, 144,000, followed by the button [VFO> and then set high frequency receiver, such as 146,000, and then press [VFO> do it again to set frequency transmitter.
FT-11R - OFF, then press the [arrow on> and [lower arrow> hold and turn.
FT-10R.
VX-5R-press [4 (MG) DSP> & [MR (SKP) SC> & [VFO (DW) SC> and turn the press
[F / W> again.
VX-150 - Press the [PTT> & [LAMP> rotate and turn the DIAL, select "SET RST" Press [F>.
Again
MOBILES:.
FT-212.
FT-90R - press the left arrow button right button and then turn DISPSS.
FT-2400.
FT-2200.
FT-2500.
1. Spender-Tc-144H reset: press F, press and hold open the AL-L F F Open press: Moniter the bottom button, hold down the + UP SELF press and hold the number 0 BAND1: open
BAND2: turn it off and turn off the end. Do statement continued.
2. Spender-Tc-144FMA Open: Turn hold press F to enter the number 6 6 2 1 0 1 end.. "
3. Spender-TH-2538 (3W) Open: Press and hold power by 168 AL-L, press F: on / off the end.. "
4. Spender-Tc-144G ON: Press the key turn-on delivery + FUN SET 5050 Press 1 Press Open / Type 2: Closed confirm the end.. "
5. Spender-Tc-144HA ON: Press and hold + MHz B2 press turned up 1 + 3 B1: Open, B2: Close to end. "
6. Spender-TH-280M ON: Press and hold Moniter + PTT turn-on - - - - Press 9 # 9 * 9 keyboard to send the end.. "
7. BENISON-FB-388 (Old) ON: Press and hold F + 1 in D cancel D: closed. "
8. BENISON-FB-388 (new) launch: Press and hold PTT + F turned on SET to enter the number 5, 6, 5, 7, the SET to enter the number 136000-174000.
Press ENT on / off, press ENT to end. "
9. TM-241 EJ Open: R 000 off the vertical display board near the battery backup an all-out put back: Closed. "
10. TM - 241 EJ (39 years) open: Press the VFO + MR + MHz open turn (off R 000: open jumper R000: off). "
11. FT-2800M (screen) Open: Press LOW + D / M + orange button and hold (reset screen) off / turn off the R 0000 R is out to put 0000 instead.
End (open permanently). "
12. IC-V 8-T ON: Press and hold PTT and turn the Open. "
13. FH - 9012 Open: Remove the rear tire off and remove the R x 2 channels on the board at Thung (permanently open). "
14. IC - V 82-T ON: Press and hold MONITER + A and then turn it on.
OFF: Press and hold MONITER + B and then turn. "
15. IC - V 83 sets of teeth machine: hold down then press EXIT turned CLCR - - - deletion of MR: Press F + 1 Set up the frequency, press box, press A - B to select the recording, press C to end. "
16. ADI - TM281 A Open: MR Press and hold power button and hold MR + PTT PTT release before the end of MR.
(Old red line cut off the screen, then press and hold open MR machine: Open). "
17. C - 150 launch: Press and hold F + 3 and then turn off: Press and hold F / off device (off chip near the CPU input diodes instead.)
".
18. FT - 415 launch: Press and hold UP-Dowd power (jump 2, 6, 3: Temporary Jump 5, 3, 7: permanent).
COVER: MR + VFO + 2 Press and hold power. "
19. FT - 416 (Black) ON: Press and hold MHz and turn power off: MR + VFO, then press the ON / OFF (jump 3, 2, 6). "
20. FT - 411 launch: Press MR + VFO +2 1000 turned up 136,000 enter 174000, press Enter, press VFO VFO.
Press enter VFO 136,000 174,000 enter the end (jump 2, 7). "
21. IC-2200: ON: Press the MONI + Low = power.
Turn off: Press SET + MW = power.
22. IC-V 85 T: Press MOni + Clr + PWR = Closed
Press Func + Moni + Pwr = open
23. Benison V 9 = Press A + On - - - - - code 47259 press <> AF = 174.000 <> IF = 136.000 Press ENT.
24. Spender TC-Di14 = Press and hold F + ON = ALLRST machine code 626101 = open / close of another round.
25. Spenter TC-144 DX = press and hold Func + Moni ON SELE press the PTT and press and hold the SCAN button, press the RESET button
CH 01 LOW by pressing the PTT 1 time - - - - - Enter 136000 then press the PTT button until the display and so on CH 02.
Press Fre / ch 2 times to confirm the opening band (how close MOni + 0 = Press the button once and then turn off the screen displays 144,000 / reboot).
26. Spender HERO - X4, SENDER 941 = Press the PTT + FUN = ON SET code 771081 and then press the numbers 1 to 136,173 or more (on bandwidth Allah).
Press 2 to 144,145 or more (off-band) and then select the menu, press (MENU) to stand stuffed.
27. SPENDER TC-144HA = off then press and hold MHz + REV turned B1 press number 3 to select the number 1 + B1 (open band) or B2 (off-band) are done on / off new
